Recent Updates
  • While regular terry features loops on both sides of the fabric, terry velour has loops on just one side. The other side is cut short to make a velvety soft, smooth surface. This indulgent weave is often used in a textured pattern for luxury bath towels, but is also a popular style for luxury beach towels as well as bathrobes.http://www.weavesolution.com/fabric-production-line/cotton-fabric-production-line/
    While regular terry features loops on both sides of the fabric, terry velour has loops on just one side. The other side is cut short to make a velvety soft, smooth surface. This indulgent weave is often used in a textured pattern for luxury bath towels, but is also a popular style for luxury beach towels as well as bathrobes.http://www.weavesolution.com/fabric-production-line/cotton-fabric-production-line/
    0 Comments 0 Shares 2471 Views 0 Reviews
  • You can sharpen colored pencils in an electric sharpener, but be sure to be very gentle with your pencils and regularly clean your sharpener to remove any wax build up. If done improperly, sharpening your colored pencils in an electric sharpener can damage both your pencils and your sharpener.http://www.tianhongstationery.com/electric-pencil-sharpener/
    You can sharpen colored pencils in an electric sharpener, but be sure to be very gentle with your pencils and regularly clean your sharpener to remove any wax build up. If done improperly, sharpening your colored pencils in an electric sharpener can damage both your pencils and your sharpener.http://www.tianhongstationery.com/electric-pencil-sharpener/
    Love
    1
    0 Comments 0 Shares 3849 Views 0 Reviews
  • A roof mount is the most common type of installation. This is when the solar racking, which holds the panels in place, is installed directly on the roof. Panels can be attached to flat or sloping roofs consisting of metal, shingle, or rubber materials.http://www.sun-novasolar.com/ground-mounting-system/
    A roof mount is the most common type of installation. This is when the solar racking, which holds the panels in place, is installed directly on the roof. Panels can be attached to flat or sloping roofs consisting of metal, shingle, or rubber materials.http://www.sun-novasolar.com/ground-mounting-system/
    Like
    1
    0 Comments 0 Shares 1821 Views 0 Reviews
  • All laminate floors are joined using a built-in locking mechanism and laid over an underlay (known as a floating floor system) with no need for glue or nails. This makes installing laminate floors a potential DIY job. Vinyl floors, meanwhile, are mostly glued down, which is a more involved process that needs a lot more skill - therefore we recommend a professional fitter for LVT.http://www.riverflooring.com/
    All laminate floors are joined using a built-in locking mechanism and laid over an underlay (known as a floating floor system) with no need for glue or nails. This makes installing laminate floors a potential DIY job. Vinyl floors, meanwhile, are mostly glued down, which is a more involved process that needs a lot more skill - therefore we recommend a professional fitter for LVT.http://www.riverflooring.com/
    0 Comments 0 Shares 4098 Views 0 Reviews
  • Copper, though not as high as silver, also has high conductivity. In fact, the official point of reference for conductors is the International Annealed Copper Standard (IACS). The most common grade of copper is ETP (electrolytic-tough pitch) copper. This is the metal used in wires, cables, busbars and motor windings. The conductivity of this copper is 101% IACS.http://www.lyyrcable.com/bare-conductor/
    Copper, though not as high as silver, also has high conductivity. In fact, the official point of reference for conductors is the International Annealed Copper Standard (IACS). The most common grade of copper is ETP (electrolytic-tough pitch) copper. This is the metal used in wires, cables, busbars and motor windings. The conductivity of this copper is 101% IACS.http://www.lyyrcable.com/bare-conductor/
    0 Comments 0 Shares 2226 Views 0 Reviews
  • As stated by Bekhta, et al. in their research paper named “The effect of chemical treatment of wood veneer surfaces on their bond ability”; the plywood panels made by using treated veneers have higher shear strength than those made by using non-treated veneers.http://www.juanawood.com/plywood/commercial-plywood/
    As stated by Bekhta, et al. in their research paper named “The effect of chemical treatment of wood veneer surfaces on their bond ability”; the plywood panels made by using treated veneers have higher shear strength than those made by using non-treated veneers.http://www.juanawood.com/plywood/commercial-plywood/
    0 Comments 0 Shares 3821 Views 0 Reviews
  • Some people have used liquids like milk, water or even soda pop as an adhesive agent for getting the inoculant to stick to the seed. If you choose to do this, be careful not to apply too much. Also, some liquids may damage the Rhizobium with any acidic contents they contain.http://www.glory-metallurgy.com/recarburizer/
    Some people have used liquids like milk, water or even soda pop as an adhesive agent for getting the inoculant to stick to the seed. If you choose to do this, be careful not to apply too much. Also, some liquids may damage the Rhizobium with any acidic contents they contain.http://www.glory-metallurgy.com/recarburizer/
    0 Comments 0 Shares 1895 Views 0 Reviews
  • The slip-on flange is a simple and excellent alternative to a weld neck as it does not have a weld bevel, and therefore allows the pipe to be adjusted in length relative to its position of the flange. The bore of the slip on will give ample amount of space for the matching pipe. This allows for enough working space for the welder and fabricator to make the connection.http://www.gcflange.com/slip-on-flanges/
    The slip-on flange is a simple and excellent alternative to a weld neck as it does not have a weld bevel, and therefore allows the pipe to be adjusted in length relative to its position of the flange. The bore of the slip on will give ample amount of space for the matching pipe. This allows for enough working space for the welder and fabricator to make the connection.http://www.gcflange.com/slip-on-flanges/
    0 Comments 0 Shares 2704 Views 0 Reviews
  • Bifocal – Bifocals contain two prescriptions within the same lens. The eyeglass lens is split into two sections; the upper part is for distance vision and the lower part for near vision. When you’re looking at someone who is wearing bifocals, you can often see the line between their nearsighted and farsighted prescription.http://www.evergrow-optical.com/single-vision-lens/
    Bifocal – Bifocals contain two prescriptions within the same lens. The eyeglass lens is split into two sections; the upper part is for distance vision and the lower part for near vision. When you’re looking at someone who is wearing bifocals, you can often see the line between their nearsighted and farsighted prescription.http://www.evergrow-optical.com/single-vision-lens/
    0 Comments 0 Shares 2180 Views 0 Reviews
  • The main difference between soap and detergent is the ingredients. Soaps are made with biodegradable ingredients such as oils, lye and fats. Detergents are made with synthetic chemicals, such as surfactants, optical brighteners and perfumes. Both clean clothes well, but detergents are more effective on stains and with brightening clothes. However, soap is kinder on the environment and skin.http://www.etransfarlifech.com/laundry-soap/
    The main difference between soap and detergent is the ingredients. Soaps are made with biodegradable ingredients such as oils, lye and fats. Detergents are made with synthetic chemicals, such as surfactants, optical brighteners and perfumes. Both clean clothes well, but detergents are more effective on stains and with brightening clothes. However, soap is kinder on the environment and skin.http://www.etransfarlifech.com/laundry-soap/
    0 Comments 0 Shares 6407 Views 0 Reviews
More Stories